Hey, no offense, but your Swim Spa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture leaks in and ends up being trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, moist environment is best for mold and mildew and other types of foul-smelling stuff.
If moisture has permeated further into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, but likewise make the cover actually difficult to remove, and not as reliable at keeping the heat in the spa. Time for a much better type of Swim Spa Cover
Stinky Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or used areas, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off properly, will ultimately start to puddle water, which is most likely time to purchase a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is also problem, and although you can ward off the inevitable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer durations, but it’s an excellent routine to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow wetness to escape do so, however don’t get rid of fragile foam panels unless definitely required.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it will not stop moisture very well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only genuine solution is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not surprised typically enough, bacteria and algae can make the most of a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise deteriorate the underside of your Swim Spa Cover cover. Since the cover is so close to the spa, it takes in the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent smelly spa covers. (Sorry however this is just BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times annually, so that it constantly looks excellent, and is safeguarded from the elements. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealership pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This primary step may seem apparent, however you need a good place to allow the cover to sit undisturbed from pets, wild animals, and winds. It must be a sunny place if possible, or a dry indoor place with low humidity can also be utilized.
• Deodorize & Disinfect: You may not need to do both, it’s finest to be as mild as possible. Do not use household cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, since the panels might end up being damaged throughout removal or cleansing. However if you identify that there is something slimy inside, you can generally unzip and eliminate the panel for a cleaning inside and out.
How often does your spa dealership anticipate you to do all this? If your swim spa is secured from a lot of sun and rain, two times per year. If it’s visible it must be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The most convenient treatment for a stinky Swim Spa Cover is to just purchase a different sort of Swim Spa Cover A stinky swim spa cover just implies that your cover is handling wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers rather will prevent offering the mold and mildew a place to grow in the first place.