Why Your Hot Tub Cover Stinks!

Hey, no offense, however your hot tub cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture seeps in and becomes trapped between the outer vinyl shell and the cling wrap foam cores. The warm, moist environment is perfect for mold and mildew and other forms of stinky stuff.
If moisture has permeated further into the cling wrap foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, however likewise make the cover really difficult to remove, and not as effective at keeping the heat in the spa. Time for a better kind of hot tub cover

Smelly Hot Tub Cover?!?
• Broken or harmed. Cracked foam cores, ripped or worn areas, torn seams. A hot tub cover that loses it’s arched roofing line, to keep water draining pipes off properly, will eventually begin to puddle water, which is probably time to buy a brand-new hot tub cover! A spa cover with threadbare areas in the vinyl is likewise problem, and although you can fend off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your hot tub cover weekly for 2 hours of airing out. A much better cover can stand up to longer durations, however it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable wetness to get away do so, but don’t remove vulnerable foam panels unless definitely needed.

Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s easy to make a hot tub cover with tape and staples, but it will not stop moisture extremely well. Even the best foam filled Hot Tub Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real service is a hot tub cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not shocked typically enough, germs and algae can benefit from a congenial environment to thrive. Low pH, high chlorine or high ozone levels can likewise deteriorate the underside of your hot tub cover cover. Due to the fact that the cover is so close to the spa, it absorbs the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The reality is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Hot Tub Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be worse than no roof at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it constantly looks fantastic, and is safeguarded from the elements. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealer pay their costs.

Your Choices

Repair Your Hot Tub Cover!
• Remove to Safe Location: This initial step may seem obvious, but you need a great place to enable the cover to sit undisturbed from pets, wild animals, and winds. It should be a warm area if possible, or a dry indoor area with low humidity can likewise be utilized.
• Deodorize & Disinfect: You might not need to do both, it’s best to be as gentle as possible. Don’t use family cleaning products on your spa cover, unusual chemicals can wind up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, due to the fact that the panels could end up being damaged during elimination or cleaning. But if you figure out that there is something slimy within, you can usually unzip and eliminate the panel for a cleaning inside and out.

How frequently does your spa dealership anticipate you to do all this? If your hot tub is secured from a lot of sun and rain, twice per year. If it’s exposed it needs to be 3-4 times each year. Let that sink in a minute.

Better Choice
The most convenient cure for a foul-smelling hot tub cover is to just buy a various type of hot tub cover A stinky swim spa cover just means that your cover is handling wetness, and things are beginning to grow! Hot Tub Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers rather will prevent offering the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *